Turn off the system and re-connect IDE cable. Each channel supports two IDE devices that make a total of four devices. To make this function work, you have to enable it in the system BIOS, connect this header to a sensor somewhere on the chassis. Be careful of the pin1 orientation. At A-Tech, customers come first.

Uploader: Barisar
Date Added: 5 November 2012
File Size: 16.57 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 73301
Price: Free* [*Free Regsitration Required]

CPU cut edge Note: AKN is model name of motherboard, R1. The orange LED indicates the link mode, it lights when linking to network and blinking when transferring data.

Turn on the power and check if the power supply and CPU fan work properly.

Please be informed that AOconfig can only be operated in a system equipped with an AOpen motherboard. This standard allows DIY component such as motherboard to apply DoC label separately without a shielding of housing. The IDE bus is bit, which means every transfer is two bytes. Dear Customer, Thanks for choosing AOpen products. Locate JP14 and short pins for a few seconds.

LED ak77 exactly the same as 5.

Other Recommended Products

Follow each step accordingly. Cpu Over-current Protection CPU, memory, HDD, add-on cards installed on this ak777 may be damaged because of component failure, human operating error or unknown nature reason.


Sata serial Ata The Serial ATA specification is designed to overcome speed limitations while enabling the storage interface to scale with the growing media rate demands of PC platforms.

How To Contact Us Please do not hesitate contact us if you have any problem about our products. 600b can clear CMOS to restore system default setting. Since internal modem card consumes no power when system power is off, it is recommended to use an internal modem. Please keep this manual carefully for future upgrades or system configuration changes.

We sell our products through resellers and integrators.

In instances where the buyer made a mistake in the product they ordered, the buyer is responsible for return shipping. Hover over the Thumbnail to enlarge. Be careful of the pin1 orientation. Choose “Load Setup Defaults” for recommended optimal performance.

In conjunction with Dr. All useful information will be described in later chapters. So, whenever the sensor is being triggered by light or opening of the chassis, the system will send out beep sound to inform you.


There are four connectors on the PC99 back panel. Wom zero Voltage Wake On Modem Connector This motherboard implements special circuit to support Wake On Modem, both internal modem card and external box modem are supported. The three color bars on the right hand side will light on according to operation temperature.


Don’t show me this message again. A-Tech modules are rigorously tested to ensure that your memory meets our stringent compatibility and performance standards.

ZIP with WinZip http: AOpen makes sure that the information you provide is encrypted, so that it cannot be read or intercepted by other people or companies.

The AKN provides an 8x slot.

Quick Installation Procedure This page gives you a quick procedure on how to install your system. It can clearly indicate whether there is a component issue or an installed issue by the 8 LEDs on the front panel of Dr.